Login | Logout |

New Product Release!! 2014 MAZDA 3/6 & CX-5 (2WD) True Torsion Rear Sway Bar

The JBR True Torsion Rear Sway Bar significantly reduces the vehicles tendency to push the front end during hard cornering, drastically reduces body roll, and greatly increases traction.

SKY RSB

The only rear sway bar for the 2014 Mazda 3/6 and CX-5 constructed out of 32mm 4130 Chromoly tubing with thick solid steel arms. The JBR True Torsion Rear Sway Bar is TIG welded inside and out then the ends are capped. Powder coated for ultimate corrosion resistance. The 2-way adjustability allows you to fine tune the handling for the street and the track.

 

SKY RSB 03

The JBR Sway Bar Kit Includes:
– New Polyurethane Mounting Bushings & Brackets with Grease Fittings
– Installation Grease
– Lifetime Warranty
– Online Installation Instructions

JBR 2-Way Adjustable Sway Bar Settings:
Stiff setting is 140 – 155% Stiffer than stock
Stiffest Setting is 250 – 265% Stiffer than stock

 

Priced at $205.00 shipped, we’ve taken the guess work out of where to buy the rear sway bar for your 2014+ Mazda

All the products shown above are available in our online catalog. For more information and to purchase, visit our website.

Email Facebook Twitter UTUBE

New Product Release!! – JBR 70 & 80 Duro Focus ST Passenger Side Motor Mounts

FST PMM 7080

The JBR Passenger Mount for the Focus ST is a vertically oriented mount. This mount can and will handle all the abuse you plan to throw at it. From street to strip it’s the only true 1 piece Passenger mount you’ll need for your Focus ST.

We’ve gone a step further and  replaced the weak cast aluminum factory support which has been prone to cracking with a support constructed out of 3/16″ steel and powder coated.

The actual mount itself is constructed of 1/4″ steel, TIG welded then powder coated.

Custom, Proven Poly Urethane bushings in your choice of 70, & 80 Durometers allow you to choose the amount of stiffness you want to run without sacrificing comfort.

Wheel Hop? What wheel hop? Torque Steer? Gone. That bang…gone too!!

Why a JBR Motor Mount?Custom Durometer urethane bushings
Aesthetically pleasing
Reduced drive train slop
Better throttle response
Precise shifts
Improved 1/4 mile times
Bolt-on installation

Includes:
1 Passenger Motor Mount
Class 8.8 Mounting Hardware
Installation instructions are available in our support section
Shipping is free in the US & our Hassle Free Lifetime Warranty is included
Focus-ST-PMM-70_01 Focus-ST-PMM-80_02
Priced at $185.00 shipped, we’ve taken the guess work out of where to buy the passenger mount for your Focus ST!

All the products shown above are available in our online catalog. For more information and to purchase, visit our website.

Email Facebook Twitter UTUBE

New Product Release – 2014 MAZDA 3/6 & CX-5 Spherical and Cylindrical Shift Knobs!

2014 MAZDA 3/6 & CX-5  Spherical and Cylindrical Shift Knobs are here!

IMG_4005

The JBR Cylindrical Shift Knob weighs in at a blistering 625 grams and the Spherical at a whopping 680! These heavy shift knobs not only look sick in the cabin but they also perform. A heavy shift knob allows for buttery smooth shifts by putting the weight at the end of the shift lever. This gives you greater mechanical advantage and lets the stick glide into gear. Powder coated in Wrinkle Black Red, Blue and the super sexy Silver Vein for superior grip.

SRed-Red-6RUL_01 Silver-Red-6RUL_01 SBlue-Sil-6RUL_01 SBlack-Sil-6RUL_01 ERed-Red-6RUL_01 ELimited-Red-RUL_01 EBlue-Sil-6RUL_01 EBlack-Silver-6RUL_01

Starting at $75.00 shipped this is a must for any enthusiast.

All the products shown above are available in our online catalog. For more information and to purchase, visit our website.

Email Facebook Twitter UTUBE

 

 

JBR’s Free Shipping is a Scam! Or is it?

Recently, I’ve received a lot of questions about our free domestic shipping. Most asking if it’s actually free or just marketing BS and deception? I’ve also read a post or two on the subject and I was direct to an actual shipping disclaimer that said  “Free Shipping” is a trick. Period. Anywhere that offers you “free shipping” on your order is crazy and losing money, or builds the cost of shipping into the cost of the part. You are always paying for it somewhere whether they tell you or not.

So, I felt compelled to address and dispel the myth that the free domestic shipping offered by JBR is in fact NOT a trick or a scam. Period. I will disclose a few of the ways we’re able to accomplish it and why it it’s so important  that you take a closer look at shipping costs and the total you pay for the parts you buy with your hard earned money.

How do they do it?

  1. Here at JBR we have created an order fulfillment process that is very, very efficient. The time it takes once we begin to process an order, to the time it’s ready for pickup by the shipper is usually less than 10 minutes. We do this by having our products well inventoried, stocked on open shelving and pre-wrapped or pre-packaged. We also have a shipping department that was carefully designed around our business and setup up in such a way that the final packaging process is very streamlined saving our employees time and our company money.
  2. We don’t use fancy boxes or tape with our name and logo on them. If we felt it would make the parts perform better or the car handle better we’d do it. It doesn’t so we don’t.
  3. We have scoured the country for the lowest cost on the proper, quality packaging materials that we need to ship our products which save us money.
  4. Many of the supporting components that accompany the parts manufactured by JBR come to us in boxes full of packing pillows, peanuts, and craft paper. So, instead of sending all of that to the landfill, we keep and reuse it to ship our products. Even the clean cardboard boxes are also cut up and used to insulate and protect the heavier parts from damaging each other while in transit so, the parts you buy arrive to you safely and undamaged. About 40% of the packaging material used by us is recycled which saves us money and our planets resources

So when you combine an efficient order processing system, good inventory management, and cost controlled  materials used to package our products it allows us to offer truly free shipping.

Still don’t believe me? Let’s do some cost comparison analysis.

  • A set of shifter bushings from one of our competitors will cost you anywhere from $24.99 to $39.00 + 6.70 shipping. Shifter bushings from JBR, $25.00 shipped. You save at least $6.70 shopping with JBR
  • A rear motor mount from one of our competitors will cost you anywhere from $119.99 to $135.00 + 16.70 for shipping. A rear motor mount of the same durometer from JBR, $125.00 shipped. You save at least $16.70 shopping with JBR.
  • An SRI and turbo inlet pipe, often referred to as a stage 2 intake system from one of our competitors will cost you anywhere from 249.99 to $354.00 + 21.66 for shipping. A similar stage 2 intake system from JBR, with no up charge for any color options, will cost you $250 shipped. You save at least $21.65 shopping with JBR.

Just these 3 products alone would leave a minimum of$45.05 in your pocket if purchased from JBR. It really adds up and when the budget is tight, don’t waste money on shipping.

We also don’t try and pass along any hidden costs either. Such as the 2-3% that PayPal  and Credit Card companies charge us to process transactions. There are no additional charges when signatures or insurance is required. There are no special handling charges either. Nada, zilch, zip. It’s FREE. When we say we pay the shipping, We mean it!

I have also read that the product quality must be inferior from those that offer free shipping in order to cover the cost of shipping. Well, you already know that’s not true when it comes to parts from JBR. We would’ve been run off long ago if that was the case.

Now, many of you have watched JBR rise up from selling short shift plate kits and AP mounts to one of the leading manufacturers Mazda aftermarket parts. We started out offering free shipping and were continuing to do it today.  All while being priced the same or less than our competition. So I ask you, does it look like we’re losing money by offering high quality parts coupled with bar setting customer service and FREE SHIPPING?

The holidays are coming and you want your money to go as far as it can. Shop and compare, then please consider buying from JBR. And beware, just because they say it’s “On Sale” doesn’t necessarily mean it’s less or that you’re saving any money when you add on the cost of shipping.

Thanks for your support.

-Jamie

Where the F#%@K has JBR been!!

Where have we been?!?!? We’ve been expanding our operations!!

For the last four and a half years JBR has been for the most part, run out of our home.  Our entire manufacturing and development operations consisted of 400sq/ft spread across two locations an hour apart! With our product line growing at a record pace we no longer had the space to store our inventory anymore either so… Something had to change.

I really, really enjoy working from home and with that in mind my wife and I bought two acres last August to build the new JBR HQ. It’s been a long and challenging build but, in two weeks it will all be finished and fully operational.

Over the last 4 weeks we’ve been closing down the old location and preparing it for closing on the 16th. During that time we had to build up enough inventory to carry us for a few weeks while we actually make the final cut over to the new shop. And on top of all that we filled a massive 4 pallet order full of JBR goodness that shipped off just last week.

The new shop is massive and it will take JBR well in to the future. All of our manufacturing and R & D will now be under one roof. We’ve made a significant investment in new equipment and now all prototyping will be done in house. We will be expanding our powder coating operations to include a much larger booth and curing oven. We have a separate building onsite strictly for the assembling finished parts before heading to packaging. The shipping department has been completely overhauled and inventory will be all electronic by year’s end.

Phone lines are being installed soon so now you’ll be able to call in, get answers to your questions faster and place orders over the phone. And believe me….I give good phone.

All in all JBR has gone from 400sq/ft to over 4000 and all aspects of the business have been or are being improved. So keep an eye out for some great things to come from JBR in the very near future.

I would like to also take a moment to thank of all of you for the PM’s and emails expressing concern about our absence online and our slower than normal response times. Starting immediately we will be online as much as possible and quick to reply to PM’s and email.

Thanks again for your continued support.

-Jamie

New Product Release…Blinded by the White Silicone!!

White 01

We’ve had a ton of requests to add White Silicone to our catalog at an affordable price. Well here it is…A full line of White Silicone is now available for your MAZDASPEED 3 and 6!! Intakes, Boost Tubes, Turbo Inlet Pipes, Bypass Hoses all IN STOCK!!

White_02

Intakes-S1

Our custom silicone is reinforced with 4 or 5 ply polyester braiding as well as wire where necessary. Silicone hoses eliminate the turbulence caused by the factory hoses delivering smooth, oxygen rich air directly in to your turbo and thru your inter-cooler. Our silicone products include wide stainless T-bolt clamps to ensure a leak free seal.

White_06

MS36-TIP

Silicone is superior at insulating the air passing thru it from extreme engine temperatures. This translates in to lower intake temperatures, lower boost air temperatures therefore, it makes more horsepower. Large Intakes and Turbo Inlet Pipes constructed out of aluminum absorb hot engine bay heat, transfer that heat to the air passing thru them and rob you of horsepower. That heat  is retained in the aluminum and it’s very slow to dissipate causing significant heat soaking issues.

White_03

MS36-RCIRC

We’ve even added the proper cold side silicone connection for the earlier model MAZDASPEED 6!

MS6-BTubes-WHT

MS36-BTubes

All the products shown above are available in our online catalog. For more information and to purchase, visit our website.